Light Material Buckets

Challenge light material bucket design and features

The three Challenge light material buckets have different rated capacities and offer different widths in comparison to our Challenge general purpose buckets. They have been developed to handle larger volumes of lighter material. The Challenge light material bucket has the same features as the Challenge general purpose bucket with the addition of internal ribs near the attachment lugs for extra strength in the back of the bucket.

  • Constructed from high tensile steel (570mpa) which is laser cut for accuracy and press formed to ensure superior strength.
  • The lower back portion of the bucket has a double plate arrangement that forms an enclosed ‘box’ section running the full width of the bucket, giving the bucket exceptional torsional strength.
  • A high quality roll formed cutting edge for excellent durability as well as wear plates on the bottom face of the bucket.
  • Heavy section pipe gives a clean smooth face to the top of the bucket.
  • The buckets’ cut ends have been pressed to give strength along the edge and sides of the bucket.
  • The attachment lugs on the rear of the bucket have plates that distribute the load to the strengthened sections of the bucket, directly behind the ‘box’ section and to the formed edge towards the top of the bucket. This eliminates deformation in the back of the bucket during loading cycles.


Challenge light material bucket specifications

Please swipe the table to read all data
Model 186LM 216LM 246LM
Tractor horse power range 55-360 hp 55-360 hp 55-360 hp
Weight 295 kg 348 kg 360 kg
Width 1860 mm 2160 mm 2460 mm
Height 910 mm 940 mm 982 mm
Depth 980 mm 1087 mm 980 mm
Overall depth 1040 mm 1160 mm 1060 mm
Rated capacity 1.10 m³ 1.45 m³ 1.50 m³
Struck capacity 0.91 m³ 1.18 m³ 1.22 m³