Round Wrapped Silage Grab

Prevent damage to your wrapped silage bales and round hay bales with a round wrapped silage grab.

The round wrapped silage grab has been designed to allow the efficient handling of wrapped silage bales and round hay bales. The large smooth surface area helps prevent damage to the wrapping material on silage bales. This attachment requires a third hydraulic control circuit, through which the grab arms are controlled.

Bringing the arms together around the wrapped silage or round bale allows it to be handled, transported and stacked. The round wrapped silage grab also allows you to rotate the bale through 90° so that you can stack bales on their flat or round sides.

This attachment is designed with several assembly configurations to accommodate the safe and secure handling of most bale sizes. The round wrapped silage grab is designed to carry a maximum of one round wrapped silage bale or one round hay bale.

Product Enquiry

Round Wrapped Silage Grab Specifications

Model200RSG
Bale sizes Up to 1800mm
Width (W) 1456mm
Length (L) 1450mm
Minimum grab space (C) 50mm
Maximum grab space (O) 2100mm
Grab arm height (H) 800mm
Weight 224kg

Attachment Measurements

  • Width (W): Measurement of the overall outside width of the attachment when closed in millimetres.
  • Height (H): Overall vertical height in millimetres from the top to the bottom of the grab arm.
  • Length (L): Overall length in millimetres from the rear of the attachment to the tip of the grab arm.
  • Minimum Grab Arm Space (C): Minimum distance in millimetres between the grab arms of the attachment when closed at the minimum configuration.
  • Maximum Grab Arm Space (O): Maximum distance in millimetres between the grab arms of the attachment when open at the maximum configuration.

 

 

 

Round Wrapped Silage Grab Related Products