Power Silage Grab

The power silage grab is an easy and safe attachment for handling pit silage.

The power silage grab has been designed to handle pit silage easily and safely. This attachment requires a third hydraulic control circuit to activate the grab portion of the attachment.

The tines are forced through the silage in a circular motion using minimal effort and ensuring an efficient cut, clamping the material in the attachment. The tines are spaced to ensure wastage from material falling through the tines is kept to a minimum. All tines fit into a tapered sleeve and are removable.

Product Enquiry

Power Silage Grab Specifications

Weight 253kg 304kg
Width 1500mm 1800mm
Depth 860mm 860mm
Volume/capacity 0.64m³ / 394kg 0.76m³ / 467kg
Bottom tines x usable length 9 x 670mm 11 x 670mm
Tine spacing 175mm 175mm
Top tines x usable length 6 x 550mm 7 x 550mm
Tine spacing 251mm 260mm
Tines on side x usable length 2 x 680 (Conus I) 2 x 680 (Conus I)
Maximum opening (O) 1124mm 1124mm

Note: Volume and capacity based on silage @ 615 kg/m³ - 30% dry volume.

Attachment Measurements

  • Width: Measurement of the overall width of the carriage in millimetres.
  • Maximum Opening (O): Maximum distance in millimetres between the upper and lower tines when open.







Power Silage Grab Related Products