General Purpose Buckets

General Purpose buckets cover a range of applications, such as digging dry soil.

All general purpose buckets have been designed to meet the high strength and safety requirements of today’s environment. There is a large variety of buckets available to cover a wide range of applications and to enable a more compatible loader/tractor combination, ensuring you get the most from your loader.

All buckets are constructed from high tensile steel (570mpa) which is laser cut for accuracy and press formed to ensure superior strength.

When attached to a Challenge front end loader, the bucket profile has been designed to ensure there is no rollback, a condition whereby material spills or falls over the rear of the bucket as it is filled. All earthmoving buckets enable maximum fill with minimum effort, ensuring an efficient loading cycle.

The lower back portion of the bucket has a double plate arrangement that forms an enclosed 'box' section running the full width of the bucket, giving the bucket exceptional torsional strength.

Buckets have a high quality roll formed cutting edge for excellent durability as well as wear plates on the bottom face of the bucket.

Heavy section pipe gives a clean smooth face to the top of the bucket.

The buckets' cut ends have been pressed to give strength along the edge and sides of the bucket.

The attachment lugs on the rear of the bucket have plates that distribute the load to the strengthened sections of the bucket, directly behind the ‘box’ section and to the formed edge towards the top of the bucket. This eliminates deformation in the back of the bucket during loading cycles.

Most general purpose buckets can be fitted with ground-engaging teeth if required.

Product Enquiry

General Purpose Bucket Specifications

Model134LCC150LCC170LCC186LCM186LC216LC246LC216HC246HC
Description Compact Compact Compact Midsize Low Capacity Low Capacity Low Capacity High Capacity High Capacity
Horse power range 21hp-45hp 21hp-45hp 21hp-45hp 45hp-70hp 55hp-360hp 55hp-360hp 55hp-360hp 55hp-360hp 55hp-360hp
Width 1340mm 1500mm 1700mm 1860mm 1860mm 2160mm 2460mm 2160mm 2460mm
Weight 62kg 78kg 88kg 178kg 190kg 220kg 245kg 240kg 265kg
Depth (D¹) 460mm 490mm 575mm 665mm 672mm 672mm 672mm 787mm 787mm
Overall depth (D²) 695mm 740mm 805mm 940mm 964mm 964mm 964mm 1040mm 1040mm
Height (H¹) 425mm 445mm 495mm 600mm 657mm 657mm 657mm 700mm 700mm
Struck capacity 0.13m³ 0.17m³ 0.25m³ 0.38m³ 0.47m³ 0.55m³ 0.63m³ 0.66m³ 0.76m³
Rated capacity 0.16m³ 0.22m³ 0.31m³ 0.49m³ 0.57m³ 0.67m³ 0.77m³ 0.80m³ 0.90m³
Optional ground engaging teeth N/A N/A N/A N/A 7 8 9 8 9

Attachment Measurements

  •  Width: Measurement of the overall outside width of the bucket in millimetres.
  • Depth (D¹): Horizontal distance in millimetres from tip of blade edge to rearmost vertical inner face of bucket.
  • Overall Depth (D²): Horizontal distance in millimetres from the tip of the blade edge to the furthermost edge of the outer bucket.
  • Height (H¹): Overall vertical height in millimetres from bottom of bucket to top edge of bucket.

 

 

 

 

General Purpose Bucket Related Products